Rapid Drying Base Screed

Rapid Drying Base Screed can be used in residential, commercial and industrial areas. This Screed allows for a much earlier overlay compared to traditional sand/cement, concrete or anhydrite screeds. 

We believe it is ideal for the renovation of existing floors. It is also excellent when used for floating floor constructions, especially when there are large irregularities in the substrate.

Floor Screeding Solutions can install this screed at depths between 20-88mm; and it can allow foot traffic after only 2-3 hours. 

Rapid Drying Base Screed gives an extra strong base layer for receiving tiles, thin topping screeds or industrial screeds.
This screed can be tiled after just 12 hours, and in normal conditions, the final floor covering can be installed after only 1-7 days.

Floor Screeding Solutions recommend this screed for levelling bonded, unbonded and floating substrates such as concrete, sand/cement and anhydrite screeds. Additionally, we recommend it for wooden boards, under-floor heating, insulation boards, existing tiles and bitumen. 

This screed can be covered with tiles, industrial and/or thin topping screeds.